Main Function; Analogue Function - Nexus NX2 Compass Installation And Operation Manual

English
4.3

Main function

Top data is COMPASS HEADING.
Top data is either magnetic or true HEADING and your choice is set
in the set-up. When magnetic Compass course is selected, the small
MAG sign is lit on the LCD.
4.4

Analogue function

Press the PAGE button to change from Compass heading to steer
reference. The LCD arrow will then point at the text STEER instead
of HEADING.
HDC 360°
the.
STR 60°
At 360° scale, each sector represent 5° and at 60°scale each sector
2
represent 1 /
3
Each sector in Compass mode
represents 5°
The text HDC 360° means true or magnetic course for
LCD pointer in a 360° scale
The text STR 60° means that the course deviation is
amplified 3 times and displayed in a 60° scale.
°.
Three sectors in steer mode
represents 2° error
5-16
COMPASS