Table of Contents
Advertisement
OPERATING INSTRUCTIONS (continued)
SETUP MENU (continued)
Selected characters
Auto Tuning
Mode
Search
Manual Tuning
Position
Frequency
Name
Sound System
Color System
Skip
NR
Decreasing the frequency
Fine Tuning
data for the main tuner
Sort
(When the Mode in Auto Tuning menu is set to [Direct], this function will be not available (grayed out).)
(A Line of position List)
Auto Off
[During VIDEO signal input]
(A Line of position List)
1 item is added to the Menu shown in the page
Selected characters
Scart Output
(Page1)
(Page2)
(Page3)
Position
Direct
–
–
1
2
3
199
AV00
••••••
–
–
–
–
( :a letter)
Auto
M
BG
Off
On
DK
I
Auto
PAL
SECAM
NTSC3.58
NTSC4.43
( :a letter)
Off
On
Auto
M
BG
Off
On
DK
I
Auto
PAL
SECAM
Increasing the frequency
NTSC3.58
data for the main tuner.
NTSC4.43
Off
On
–
–
Off
On
Off
On
–
–
.
35
Off
On
TV
Monitor
Setup hint
Select the channel entry method between position setting or direct
setting. And press the OK button to fix it.
• If [Position] is selected, the screen display will be numbers (1~199
and AV00).
• If [Direct] is selected, the screen display will be C ✱✱ at the channel
0~99 and S ✱✱ at the channel 100~199.
Press the OK button and it starts the auto tuning.
Set the position number(0~199) or channel number(C ✱✱ , S ✱✱ ) by ▼
▲ PROGRAM UP/DOWN buttons.
• If [Position] has been selected, search the frequency here by
pressing
buttons.
• If [Direct] has been selected, this function will be not available
(grayed out).
This is used to input the name of the TV station within 5 letters. After
fixing the cursor on the first digit, select a letter by ▼ ▲ SELECT
buttons and move to next digit by
ADJUST button. Press the OK
button again after finished.
• Selectable letters are "0"~`"9", "A"~`"Z", "+", "–", " "(blank),
","(comma) and "."(period) .
Select the sound system through the 5 different settings.
Select the color system through the 5 different settings.
If this is set to On, that position will be skipped while selecting
positions by PROGRAM UP/DOWN buttons.
This is automatically set to On for those non-broadcasting channels.
If this is set to On, it helps to reduce the noise interference visible on
the screen, especially in the weaker signal reception areas.
After completing the fine-tuning, press the RETURN button to exit this
mode.
• The variable range is -56 ~ +56.
Press OK button at the a line that is required to change order, then
the characters will change to green. And move it up or down in the list
by pressing ▼ ▲ SELECT buttons. And press OK button to complete
it. Press the RETURN button to exit.
If this is set to On, the power will be turned off when there is no
transmission signal and no operation for about 10 minutes in the TV
mode.
Press OK button at the a line that is required to change order, then
the characters will change to green. And move it up or down in the
list by pressing ▼ ▲ SELECT buttons. And press OK button to
Setup hint
TV:AV4 (Scart) output will be fixed as TV signal output.
Monitor:AV4 (Scart) output can view the image as on the main unit.
But it is possible to monitor only the composite video signal from
AV1, AV2, or AV3 input that is displayed on the screen at the time.
45
Advertisement
Table of Contents
