Erase All Memories; Caller Id - Olympia OL3020 Owner's Manual

Entering Your Message
1. Use UP and DOWN on the blinking field to scroll through the upper and lower
case letters of the alphabet, numbers 0-9 and punctuation marks.
2. Use the RIGHT key to move onto the next character. The LEFT and RIGHT
keys may also be used to find the desired location for reselecting, editing, or
deletion.
3. Hold SELECT down to delete flashing character. If it is at the beginning of the
line, it deletes all the characters.
4. When your message is complete, press SELECT to confirm.
Note: During programming, after 20 seconds of inactivity, or an incoming call
will return the device to Standby mode. The setting is saved.

10 Erase All Memories

The following procedure erases the Caller ID list and user programmed messages.
Date, Time, Time Mode, Date Format, and DST are retained.
1. Press SELECT; press UP to find ERASE MEMORY in the Menu.
2. Press SELECT again. ERASE ALL? appears.
3. Press SELECT key to confirm.
4. The word ERASED appears, and then the InfoGlobe returns to Standby Mode.

11 Caller ID

(Note: This section applies if you subscribe to Caller ID service)
The InfoGlobe will detect Caller ID with the inbound ringing. Twenty seconds
after Caller ID information is received, the display will return to Standby.
•
Caller ID information will be received and stored in the call log which has a
maximum number of 54 memory locations; each location holds up to 16 digits and
18 characters.
•
The last Caller ID received will be the first to be shown in the list.
•
When the Caller ID list is full the oldest Caller ID is automatically deleted and the
most recent Caller ID is added.
OL3020 User Manual
3 9