STEP 6:
ATTACH THE OVEN TO THE WALL
WARNING
You will need two people to lift this
microwave.
Failure to use more
than one person
could result in
personal
injury.
1. Carefully
lift microwave
oven and hang it on support
tabs (See Figure 26 on the page
15) at the bottom
of the mounting
plate. Reaching
through
upper
cabinet,
thread
power supply cord through
the
power supply
cord hole in the bottom
of the upper
cabinet.
See Figure 30.
2. Rotate the microwave
oven upward
so the top of
oven is against
the bottom of the upper cabinet
or
cabinet
frame.
__
power cord
Figure 30
3. Insert a bolt down through
each hole in the upper
cabinet
bottom.
See Figure 31.
Tighten the bolts until the gap between
the upper
cabinet
and microwave
oven is closed.
4. If wall vented
or room vented installation
is used, go
to No.7 on the next page.
Figure 31
17