Table of Contents
Advertisement
Enter the number or address. For phone numbers,
use the 10-digit format. For email addresses, see
"Entering Text" on page 55.
Tip: Press A under Browse to select a number or
address from Contacts, the recent calls list, or
Memo.
When you are finished, press O.
6 If you want to change the default Speed Dial
number or create a voice name for the entry, select
[Options]. See "Assigning a Speed Dial Number
or Voice Name" on page 44.
7 If you want to add more numbers or addresses to
the entry:
Scroll past the information you already entered.
Enter the additional information for the entry using
step 2 through step 6. You must assign a name to
the entry, if you have not already.
Press A under Done.
Assigning a Ring Tone or Picture
1 If you have not already, select [Ring
Tone/Picture].
2 If you want to assign a ring tone from the list of ring
tones:
With Ringer highlighted, scroll left or right to
choose a ring tone. -or-
Select Ringer. Select the ring tone you want to
assign from the ring tones available in the media
center.
3 If you want to assign a picture from the media
center:
Scroll to Picture. Scroll left or right to choose a
picture. -or-
Select Picture. Select the picture you want to
assign.
Only pictures that can be assigned to Contacts
entries are displayed. Some large pictures cannot
be assigned.
Note: If you choose a picture that is stored on the
memory card, that picture file is
automatically copied or moved to your
handset's memory according to the rules
described in "Pictures Stored on the Memory
Card" on page 114.
Tip: If an entry has a picture assigned and you
want the entry to have no picture, select [No
Picture] or press A under Unassign.
4 When you are finished, press A under Back.
Creating Entries
43
Advertisement
Table of Contents
