Attach Anti-Tip Bracket To Floor - Bosch HES5062U-01 Installation Manual

6. Insert s tripped endofwhitewireintothecenterlugontopoftheground strap.
Secure theclamping screw.
lug . __7"
wire
clamping screw
Figure 17: Attaching Wire to Lug
7. Insert stripped end of red wire into the left lug. Secure clamping screw.
8. Insert stripped end of black wire into the right lug. Secure clamping screw.
9. Tighten each clamping screw with the appropriate torque (See table below).
Table 3: Appropriate Torque Levels for Aluminum or Copper Wire
6 35 3.95
i ii! iiiii ii
.................................................................................... 8 ............................................................ ............................................................ ............................................... .................................... .....................
10. Properly secure flexible conduit at knockout panel on range and at supply
................................ sid unct!° box:Th wir!n ! no com13!et ..................................................................
green g_ound so'ew
Figure 18: Completed Three Wire Flexible Conduit Connectiog
6) Attach anti-tip bracket to floor
Note: DO NOT plug in range at this time.
_ WARNING
RANGE TIPPING HAZARD
All ranges can tip and injury could result. To prevent accidental tipping of the
range, attach it to the wall, floor or cabinet by installing the Anti-Tip Device sup-
plied.
English 12