Table of Contents
Advertisement
Minimum sine wave continuous average power output
is:
600 watts into 2 ohm load
600 watts into 4 ohm load
600 watts into 8 ohm load
2, 4 or 8 ohms
20Hz to 20,000Hz
0.005% maximum harmonic distortion at any power
level from 250 milliwatts to rated power, 20Hz to
20,000Hz
1.8dB
+0, -0.25dB from 20Hz to 20,000Hz
+0, -3.0dB from 10Hz to 100,000Hz
4.8 Volts Balanced
2.4 Volts Unbalanced
18
0.005% maximum, if the instantaneous peak power
output does not exceed twice the rated power output
for any combination of frequencies from 20Hz to
20,000Hz.
Greater than 40
22,000 ohms Balanced
22,000 ohms Unbalanced
29dB, 8 Ohms
26dB, 4 Ohms
23dB, 2 Ohms
Less than 2% Total Harmonic Distortion with up to a
14dB overdrive signal
5-15VDC, less than 1mA
12VDC, 50mA maximum total
Output is delayed 0.2 seconds from turn On
Field AC Voltage conversion of the MC601 is not
possible. The MC601 is factory configured for one of
the following AC Voltages:
100V ~ 50/60Hz at 8 Amps
110V ~ 50/60Hz at 6.6 Amps
120V ~ 50/60Hz at 6.6 Amps
220V ~ 50/60Hz at 3.6 Amps
230V ~ 50/60Hz at 3.3 Amps
240V ~ 50/60Hz at 3.3 Amps
Standby: less than 0.5 watt
Note: Refer to the rear panel of the MC601 for the cor-
rect voltage.
Panel, Handles and Cables
shipping carton
Advertisement
Table of Contents
