Table of Contents
Advertisement
Care, Maintenance, and Storage
Before care or maintenance is applied, always unplug the cord from the receptacle. The cabinet housing
can be wiped down with a slightly wet cloth or with non-corrosive, mild, furniture polish. The heater has a
washable filter. The filter should be cleaned or rinsed regularly to provide maximum performance. Once
the filter is removed, run warm water through and over the filter (a mild soap can be applied to assist in
removing dirt and dust). Dry the filter completely before re-installing into the heater.
If the heater is not to be used for an extended period of time, it can be stored away. Make sure the
power is turned off and the cord is unplugged from the receptacle. Wrap the cord around the handle on
the rear of the portable heater. Cover the heater to prevent dust from accumulating on the heater. You
may want to repack it back in its original carton. Always store the heater in a dry and dust free
environment.
(Note: You may want to clean the filter prior to storing the heater away so that it is ready for operation the
next time it is used.)
Troubleshooting
1. PROBLEM:
a. If the Heat Emitter is broken or damaged
b. If the Control Panel is not responding, the temperature reading is above 86
odor coming from the portable heater
c. Or if the power cord is damaged
SOLUTION: Contact the manufacture immediately. DO NOT attempt to operate the portable heater as this may
cause electric shock, fire, and/or injury.
2. PROBLEM:
a. The amount of heated air exiting the front of the portable heater is reduced.
SOLUTION: Check the electrostatic filter to make sure it is free of dust and dirt. Also
check the front grill and rear air intake to make sure it is not being blocked by any kind of debris.
3. PROBLEM:
a. The heater will not turn on.
SOLUTION: First, test your outlet to make sure it has power. You can do this by plugging in another appliance
and turning the appliance on. Second, check the LED display to see if it is flashing. If this is the case, press
the POWER button to turn off the TIME and resume normal operation of the portable heater. Third, check the
power switch to see if it is lighting up. If the outlet does have power, the LED display is not flashing, or the
power switch is not lighting up, contact the manufacturer immediately for further troubleshooting.
4. PROBLEM:
a. The portable heater continues to operate even when the power switch is turned off.
SOLUTION: Do not unplug. The portable heater has a fan that will continue to operate even when the power
switch is turned off. This fan continues to run in order to cool down the portable heater. Once the fan stops
running, you can then unplug the portable heater.
0
0
F/30
C, or there is a burning
Advertisement
Table of Contents
