Table of Contents
Advertisement
CARE AND MAINTENANCE
WARNING: Before performing any maintenance task, turn off the power switch in the rear of the unit,
unplug the unit, and allow it to cool completely .
1 .
To keep the heater clean, clean the outer shell with a soft, damp cloth . Use a mild detergent if
necessary . After cleaning, dry the unit with a soft cloth .
CAUTION: DO NOT let liquid enter the heater .
2 .
DO NOT use alcohol, gasoline, abrasive powders, furniture polish, or rough brushes to clean the
heater . This may cause damage or deterioration to the surface of the heater .
3 .
DO NOT immerse the heater in water .
4 .
Wait until the unit is completely dry before use .
5 .
If you will not be using the heater for a while, take the batteries out of the remote control and store
for future use .
6 .
Store the heater in a cool, dry location when not in use . To prevent dust and dirt build-up, use the
original packaging to repack the unit .
CLEANING THE AIR FILTER
1 .
Clean the air filter (2) after three months or if it appears to be blocking airflow . With the heater
unplugged, remove the two filter screws (1) as illustrated below . Clean all parts of the filter
assembly and allow parts to completely dry .
2 .
Reassemble and reinstall the filter (2) .
WARNING: Do not use the heater without the filter assembly in place .
1
15
2
1
Hide quick links:
Advertisement
Table of Contents
