Reference Sections; Troubleshooting - Haier 0090504932V User Manual

Digital led lcd television
Table of Contents

Advertisement

Available languages

Available languages

Using the features
Press
button to select the content you recorded.
Press the
button to display the program
information.
Press
button to cancel.
Press OK or PLAY/PAUSE button to play the
program recorded and press STOP button to stop it.
Note
Changing the channel will not influence the
recording in the same frequency, but will influence
the time shift. When the recorded program is being
played, you can not delete it.
Press the INDEX button repeatedly, the program
will be displayed in the order of program name,
channel name, program time, file name and file
length.

Reference Sections

Troubleshooting

To assist in location of possible faults use the
help guide below:
Verify if the television is
properly plugged in.
No picture, no
Verify if the television has a
sound
proper supplied power source.
Verify if electricity is available.
EN-29 Digital LED LCD Television Instruction Manual
Verify if correct signals are
input.
Operate the remote to change
Blank screen
signal input to correct input.
Restart the television if power
supply is interrupted.
Press MUTE button and verify if
Mute mode is set.
Switch to other channel and
No sound
verify if the same problem
happens.
Press VOL+ button to see if the
problem can be solved.
Verify if sound system is correct.
Poor sound
Refer to user's manual for
adjustment.
Verify if correct channel is
No picture in
selected.
some channel
Adjust the antenna.
Verify if the same problem exists
No color for
in other channels.
some channel
Check out of picture and sound
program
systems.
(black and
Refer to relative instructions
white)
in the Manual for color
adjustment.
Verify if the antenna is correctly
connected.
Spots with
Verify if the antenna is in good
some or all
condition.
pictures
Make fine adjustment of
channel.
Disconnect the television from
power supply and 10 seconds
later, connect the television
Television out
to the power supply. If the
of control
problem still exists, contact
authorized after-sales service
for technical assistance.
Note
If the fault can not be repaired using the above
guide consult with your local authorized service
centre.
The TV set must only be repaired by a qualified
registered service person. Never attempt to
remove the back cover as the TV set has dangerous
voltages in side that may cause a fatally or fire.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Let26a300Let32a300

Table of Contents