The intermediate value is 0. When indication value of Balance increases toward+50, sound of the right and left speaker becomes stronger and weaker, respectively. When indication value of Balance decreases toward -50, sound of the right and left speaker becomes weaker and stronger. Press MENU button and then CH+/- button to select AUDIO menu.
TV`s speakers. Select Surround from -50 to +50 . When intermediate value toward +50, the effect will be distinctness. Repeated step 1-2, and press CH+/- to select surround, and then press VOL+/- to set the desired value.
Auto Volume Each broadcasting station has its own signal conditions, and so it is not easy for you to adjust the volume every time the channel is changed. This feature lets you automatically adjust the volume of the desired channel and reduces the volume differences between channels and programs, providing a more constant overall level.
Timer menu Timer setting The clock will only work if the TV set is turned on or in standby. When the set is disconnect from the power supply or is turned off by the main power on the rear panel, the clock loses...
Page 6
Timer menu You can set the On/Off timers so that the set will : Switch on automatically and tune to the channel of your choice at the time you select. Switch off automatically at the time you select. On/off timer \Timer on Prog\ Timer Prog Press MENU and VOL+/- button to call up the TIMER menu on the screen.
TIMER ZOOM EXIT Menu Timeout Repeat step 3 and 4 to select the time of the OSD display in sequence as follows: 5 seconds,10 seconds, 15seconds, 20seconds, 25seconds, 30 seconds and 40 seconds. Menu Background Repeat step 3 and 4 to select Transparent / Opaque background of OSD.
CH+/- to adjust them. TV/AV SWAP P.STD S.STD TeleText Language Repeat step 3 and 4 to select from 6 kinds of languages. (West Europe/East Europe/Cyrillic/Greek/Arabic/Persian.) VOL- MENU VOL+ Restore Default Value Repeat step 3 and 4 to return the factory mode.
VOL- MENU VOL+ 4:3 Mode Choose 4:3 when you want to view a picture with an original 4:3 aspect ratio, with black bars appearing at both the left and right sides. H.LOCK Using the MENU button.
Adjust menu In PC input mode, H-Position and V-Position can be adjusted to eliminate transverse line interference and decentered picture as follows: H-Position and V-Position adjust Adjust is opted for adjusting H-Position and V-Position as well as relative parameters in VGA and HDMI modes.
Adjust menu RGB/Default/Auto Sync 1) RGB is opted for adjustment of the numerical value of red, green and blue in VGA,HDMI mode. 2) Default is opted for adjustment of parameters to delivery setup in PC mode.(After the operation, complete will be on the...
Password needs to be entered when the program lock mode is to be set. TV/AV *#() SWAP Note: If the password is not correctly entered, you will be P.STD S.STD required to reenter the password and the cursor will stay at the first place.
Page 13
(To set On, some operation such as search will be not available. When enter the TUNING menu, Tuner Lock will be on the screen, and the time will be the same with the main menu if no operation. If you want to operate TUNING menu, you need to enter the Lock menu to set Tuner Lock Off or operate Clear Lock.
Lock Set menu is set, current volume will become set m a xi m u m v ol u m e. I f cu rre n t v ol u m e i s b el ow maximum volume, customer set volume will stay H.LOCK...
If the DISPLAY button is pressed again, the displayed information will disappear. VOL- MENU VOL+ (If the program is named, its name will also appear ). Auto program scan H.LOCK CH.LIST TIMER ZOOM EXIT...
CH.LIST TIMER ZOOM EXIT Press Still button, the picture will be still; if to cancel, press Still button again, the picture will resume. Auto switch-off function If an empty channel is selected or the TV programs are ended for the day, the power will be switched off 5 minutes later automatically.
Teletext functions Teletext is an information system, broadcast by certain channels, which can be read like a newspaper . It also provides subtitles for people with hearing difficulties or those who are unfamiliar with the language in which a particular programme is being broadcast (cable networks, satellite channels, etc.).
Page 18
Teletext functions (MIX) While in Teletext mode press the button will show the teletext data superimposed on top of the TV picture. Press the button again to revert back to Full text. (HOLD) Pressing the button will stop the teletext page automatically updating.
Cleaning the Screen . Here`s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it`s almost dry, and then use it to wipe the screen.
(red, blue or green) spots, or some anomalistic stripes or spots. This is not defect. If the TV set is used in an area 2,400 meters above the sea level where the air pressure is below 750hpa, the picture on the screen may be affected and a muffled sound might be produced.
Page 22
0090506971H 01 PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.com.cn...