Analog Manual Search; Channel Edit - Haier 0090504932V User Manual

Getting Started
B
Press button to select Tuning menu, press
button to enter.
C
Press button to select Digital Manual Search
item, press button to enter.
D
Press button to select the Channel.
Press OK button to start searching.
E
Once a channel is located, you can press
to save it.
Press EXIT button to exit.

Analog Manual Search

Follow the below steps when you need to have a manual
search.
A
Press MENU button.
B
Press button to select Tuning menu, press
button to enter.
C
Press button to select Analog Manual Search
item, press button to enter.
EN-13 Digital LED LCD Television Instruction Manual
D
Press
button is used to select the higher frequency
channel.
Press
channel.
E
And then select Storage To, press
select the position number you want the channel
OK button
on. Once a channel is located, you can press red
button to save it. Press EXIT button to exit.
Sound System
Press
press
Current CH
Press
edit.
Storage To
Press
want to storage to.
Fine tune
If the picture and/or sound are poor, try using the
FINE TUNE feature. Do not use this feature unless
reception is poor.
A
Repeat above steps
select the Fine Tune item.
B
Press
tune, till the best picture and sound are obtained,
then loosen the button.

Channel Edit

Using this function, you can rename, move, set favorite
channel and skip the channel in the analogue mode.
A
Press
button to select Search item, press
button is used to select the lower frequency
button to select "Sound System", then
button to select the correct sound system.
button to select the channel number to
button to select the program number you
A-C, then press
button repeatedly to carry out fine
MENU button.
button to
button to