Damage Prevention Messages; Safety Label Locations; Saw Features - MK Diamond Products MK-2013 HSP Owner's Manual

Respiratory Protection!
Always use approved respiratory protection.
Hearing Protection!
Always use approved hearing protection.

damage prevention messages

Other important messages that are designed to help prevent damage to your MK-20 Series concrete saw, other property, or the
environment are preceded by the word notice.
notice
Your MK-20 Series concrete saw or other property could be damaged if you don't follow instructions.

safety label locations

on
Safety labels are located according to the chart below and the parts list starting on page 15. The labels contain important safety
information. Please read them carefully. These labels are considered a permanent part of your saw. If a label comes off or becomes
hard to read, contact MK or your dealer for replacement.
Item Location
C6 Top of Belt Guard
C7 Front of Belt Guard
C8 Top of Shaft & Belt Guard
D15 Top of Blade Guard
G13 Top of Console Tower
G14 Back of Console Tower
G15 Back of Console Tower
G16 Back of Console Tower
G17 Back of Console Tower
L19 Top of Gas Tank
L20 Top of Gas Tank
L21 Front of Gas Tank
L22 Top of Gas Tank
M7 Front Edge of Frame
O4 Center of Handlebar
The MK-20 Series Concrete Saw is designed for wet or dry, high production flat and general industrial application

Saw Features

sawing. The heavy duty steel, one piece box frame is precision jig welded and reinforced. This precisely reinforced steel
construction with balanced weight distribution and ergonomic handlebars assures straight and accurate cutting as well
as ease of operations preventing fatigue. The 4-cycle air cooled engine is located for easy access and maintenance.
Each solid rubber wheel is mounted on an axle for years of reliable use. The rear axle is rigid, while the front axle pivots
causing the blade to be lowered to the desired cutting depth. The positive screw feed provides precision control of the
raising and lowering of the blade. The positive screw feed control wheel and all controls are located for easy access and
visibility. The following table shows the available models and the features that differentiate them.
Engine
The MK-2013HSP features a Honda ™ GX390 13 hp engine. The MK-2013HE features a Honda GX390 with electric start. The MK-
2020 HSP features a Honda™ GX620 20 hp engine with electric start and key ignition switch and 16" blade guard.
4
on
MK-20 Series Concrete Saw
Model
Engine/Blade Capacity
Honda GX390 13 hp
MK-2013 HSP
16" blade guard
Honda GX390 13 hp
MK-2013 HE
16" blade guard
Honda GX620 20 hp
MK-2020 HSP
20" blade guard
Revision 09/06, Effective Date September 18, 2006
Description
Spark Plug Caution Label
Belt Tension Caution Label
Guards in Place Caution Label
Lift Guard Caution Label
Central Control Panel
Water On/Off
Engage
Disengage
Engine Stop
Hot Surface Caution Label
Refueling Warning Label
California Danger Label
Lethal Exhaust Danger Label
Hands and Feet Caution Label
Handle Lifting Warning Label
Additional Features
cyclone air filter, tach/
hourmeter
electric starter, tach/
hourmeter, centrifugal
water pump (optional)
electric starter, tach/
hourmeter, centrifugal
water pump (optional)
Part #
155579
155583
155587
155586
156749
154404
154405
154406
156601
155578
155580
155581
155582
155585
156627
MK-20 SERIES