1.2.1 The front panel
The front panel of the digital receiver has buttons to control
the digital receiver, specific lamps and a display to indicate its
status. The following indicates what they mean.
Front display shows the current time in standby mode, and
displays the current service in operation mode.
button switches the digital receiver between standby
mode and operation mode.
CHANNEL
,
They are also used to navigate in menus and interactive
screens.
STANDBY lamp lights up while the digital receiver is in
standby mode.
MESSAGE lamp is not used.
IR/RADIO lamp blinks whenever you press a button on the
remote control.
You have to insert your subscription card into the front slot to
watch pay services.
1.2 Controlling the digital receiver 3
buttons switch to previous or next service.