Table of Contents
Advertisement
3.3 Local time setting
The digital receiver can output two types of digital audio sig-
nals via the S/PDIF connector. One is an encoded signal, and
the other is a decoded signal. If your digital audio system does
not have a Dolby Digital decoder, you have to set the Digital
Output (Dolby Digital Only) option to PCM. Otherwise, set it to
Bitstream.
NOTE
If the service you are currently watching does not provide
Dolby digital, you cannot watch the programme with Dolby
sound even though you set the Digital Output option to Bit-
stream.
You should set your local time for timer events.
1. Set the Mode option to Auto; then the Time Offset option
becomes enabled.
2. Set the Time Offset option to the time difference between
your time zone and GMT referring to Table 3.1.
3. Make sure that your local time is correctly displayed on
the Local Time option.
3.3 Local time setting 17
Select the System Setting
Setting menu. You should see a
screen like the left figure.
You can set the clock manually
or use the time signal, Green-
wich Mean Time (GMT), carried
as part of the digital television
broadcast.
To use Greenwich Mean Time,
take the following steps:
Time
Advertisement
Table of Contents
