Switching On For The First Time; Powering On And Checking Picture - Topfield CBC-5200 User Manual

12 Setup
2.6 Switching on for the first time

2.6.1 Powering on and checking picture

If the digital receiver no longer reacts properly to remote con-
trol commands, the batteries may be flat. Be sure to remove
used batteries. The manufacturer accepts no liability for the
damage resulting from leaking batteries.
NOTE
Batteries, including those which contain no heavy metals, may
not be disposed with other household wastes. Please dispose
of used batteries in an environmentally sound manner. Find
out the legal regulations which apply in your area.
Now that you have your digital receiver connected, you should
plug it into a mains socket. Ensure that your television set is
turned on and on the correct AV channel, so that you will be
able to see the display from the digital receiver.
Press the button in top left corner on the remote control.
After about 10 seconds you may see a picture displaying a
menu. If the picture is good, you can skip to §
for the available television and radio services.
you may need to temporarily connect the composite video
connector (VIDEO) to your television set so that you can see
the on-screen menus in order to configure the video settings.
4.1 to search
Otherwise,