Tire Change
Stay for holding the seat upright
Tire Change
For replacing a flat tire, unscrew the nuts, which secure the wheel to brake drum
and slide off the wheel. Repair the tube or fit on the spare wheel. In case of rear
wheel, use the jack as described in previous page.
For removing a tire & tube first deflate the tube and unscrew the nuts on the
wheel so that the two halves of the rim fall apart. (Refer fig.)
Do not forget to put spring washers before tightening the nuts at the time of re-
assembly. Tighten the nuts diagonally and evenly.
Stay for holding the seat upright
Stay for holding the seat upright is bolted to seat bracket. This will hold the seat
upright. For this, stay should be moved below the seat. While lowering the seat,
care should be taken to remove this stay.
21