Garrett CS 5000 User Manual page 23

8.11 REGULATORY INFORMATION
The unit also complies with IEC standards for Safety Requirements for Electronic Measuring
Apparatus and meets the Federal Communications Commission Class B standards for noise emis-
sion from commercial electrical equipment. It also conforms to the European Electromagnetic
Compatibility Directive, 89/336/EEC -EN 55011, Group 2, Class B;-EN 50082-1.
8.12 WEATHERPROOFING/FOREIGN OBJECT PROTECTION STANDARDS:
Meets IP 31, IEC Standard 529, Degrees of Protection Provided by Enclosures.
8.13 INTERFERENCE REJECTION
100% sensor coil Faraday shielding. DSP(Digital Signal Processor) automatically suppresses or
eliminates most noises associated with x-ray devices, video monitors and communications equipment,
such as radios and walkie talkies. RFI-EMI filters provideattenuation from 10 MHz to 1000 MHz.
8.14 SYNCHRONIzATION
Multiple frequencies permit several CS 5000s to operate simultaneously in close proximity.
8.15 ELECTRICAL
Fully automatic 100 to 240 VAC, 50 and 60 Hertz, 55 watts; no rewiring, switching or adjustments
required. Power supply meets UL, CSA, and TUV standards. Also complies with IEC standards for
Safety Requirements for Electronic Measuring Apparatus and meets the Federal Communications
Commission Class B standards for noise emission from commercial electrical equipment.
8.16 DIMENSIONS
• Passageway interior:
• Overall exterior:
• Shipping:
• Throughput Rate:
• Optional features:
©2009 GARRETT METAL DETECTORS
CS 5000
User Manual
Width: 30" (0.76m) / Height: 80" (2 m) / Depth: 23" (0.57m)
Width: 35" (0.9m) / Height: 87" (2.2m) / Depth: 23" (0.57m)
Width: 33.5" (85.1cm) / Height: 91.5" (223.4cm) / Depth: 6.25"
(15.9cm) / Weight: 129 lbs. (58.6 kg)
Not limited by electronics; 50-60 detections/minute is reasonable.
Remote operating capability (indicators and/or console); battery
back-up module (built-in for portability); Magnadolly (for easy
movement of assembled unit).
23 PN 1530100 REV H