Haier DWL2825 User Manual page 23

24" built-in dishwasher
Hide thumbs Also See for DWL2825:
Table of Contents

Advertisement

Available languages

Available languages

HEATED DRY
Select this option to dry dishes with heat.
Not selecting heated dry skips the drying period. If the heated drying period is
not selected the dishes take longer to dry and some spotting can occur. For best
drying, always use a liquid rinse aid. Some items (such as plastics) may need
towel drying.
NOTE: Heated Dry is an option with Pots and Pans Wash, Normal, Light and
China/Crystal cycles. For faster air drying, you can open the door a
couple of inches after the final rinse is complete.
STEAM OPTION (select models)
Use for all dish loads, including extra large loads. Steam is generated early in the
cycle to help wet baked on soils from dish load and soften it for easier removal by
the wash system. The steam cycle raises the temperature in the final rinse to 150ºF
(66ºC). If the STEAM option is desired, it must be turn on prior to or within 10 sec-
onds of the machine starting. If the STEAM option is not wanted after the machine
has run more than 10 seconds, the cycle must be cancelled and started over.
NOTE: This option can be used with all cycles except Rinse and Hold and Speed
cycle.
DELAY HOURS (select models)
You can add items to the load anytime during the delay countdown. After adding
items, close the door firmly until it latches.
DWL3525 - push once for a 6 hour delay
DWL4035 - push once for each hour of delay up to 9 hours
DWL7075 - push once to cycle between 3, 6 or 9 hours of delay
You can delay the start of a cycle up to 9 hours in 3 hour increments (3, 6, or 9 Hr)
To delay the start
1. Open the door
2. Repeatedly press "Delay Hours until you see the desired hours of delay lighted
in LED indicator on the left. When the delay reaches 9 hours, the delay turns
off. Press "Delay Hours" again to select a new number of delay hours.
3. Select a wash cycle and options
4. Close the door
NOTE: To cancel the delay and cycle, press Cancel. To Cancel the delay and
start the cycle immediately, press Delay Start until there is no light in any
of LED indicators on the left.
22

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents