Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Instructions for Using
29 IN. (73.7 CM) GAS DRYER
INSTALLATION INSTRUCTIONS
Table of Contents
DRYER SAFETY ...............................................
1
.................... 3
Tools and Parts .............................................
3
Location Requirements ................................
3
Electrical Requirements ................................
4
Gas Supply Requirements ............................ 5
Venting Requirements ...................................
6
Plan Vent System ..........................................
6
Install Vent System ........................................
8
Install Leveling Legs ......................................
8
Level Dryer .....................................................
8
Make Gas Connection ...................................
9
Connect Vent .................................................
9
Reverse Door Swing (Optional) ..................... 9
Complete Installation ...................................
10
DRYERSAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
You can be killed or seriously Injured If you don't Immedlatel_
follow Instructions.
You can be killed or seriously Injured If you don't follow
Instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance or injury, and tell you what can
happen if the instructions are not followed,
I
IMPORTANT SAFETY INSTRUCTIONS
When discarding or storingyourold clothesdryer,removethe door.
SAVE THESE INSTRUCTIONS
8535915
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Inglis IM70000
Summary of Contents for Inglis IM70000
-
Page 1: Table Of Contents
29 IN. (73.7 CM) GAS DRYER INSTALLATION INSTRUCTIONS Table of Contents DRYER SAFETY ..........Install Vent System ........INSTALLA'RON INSTRUCTIONS ....3 Install Leveling Legs ........Tools and Parts ..........Level Dryer ............. Make Gas Connection ........Location Requirements ........ Connect Vent .......... - Page 2 WARNING: For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, or to prevent property damage, personal injury, or death. - Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
-
Page 3: Installa'ron Instructions
INSTALLATION INSTRUCTIONS Toolsand Parts Location Requirements Check that you have everything necessary for correct installation. Proper installation is your responsibility. Knife 8 in. or 10 in. pipe wrench 8 in. or 10 in. adjustable Safety glasses wrench (for gee Vent clamps connections) Pipe-joint compound Flat-blade screwdriver... -
Page 4: Electrical Requirements
Installation C learances Companion appliance spacing should also be considered. The location m ust b elarge enough to allow the dryer door to open fully. Dryer Dimensions 241nZ (25_) (25_) (705cm)(14cm) 1. Recessed area 2. Side view - closet or confined area 3. -
Page 5: Gas Supply Requirements
IMPORTANT: The dryer must be electrically grounded in L.R gas conversion: accordance with local codes, or in the absence of local codes, Conversion must be made by a qualified technician. with the National Electrical Code, ANSVNFPA 70. No attempt shall be made to convert the appliance from the gas specified on the modal/serial rating plate for use with a different gas without consulting the serving gas supplier. -
Page 6: Venting Requirements
Dryer Gas Pipe • The dryer exhaust must not be connected into any gee vent, chimney, wail, ceiling, or a concealed space of a building. • The gee pipe that comes out through the rear of your dryer has a % in. male pipe thread. •... - Page 7 Standard exhaust installation with rigid metal or flexible Determine Vent Length metal vent 1. Select the route that will provide the straightest and most direct path outdoors. Plan the installation to use the fewest number of elbows and turns. When using elbows or making turns, allow as much room as possible.
-
Page 8: Installvent System
Determine the number of elbows you will need. Examine the leveling legs. Find the diamond marking. NOTE: Do net use vent runs longer than specified in the Vent Length Chart, The following chart helps you determine your maximum vent length based on the number of 90 ° turns or elbows you will need and the type of vent (rigid or flexible metal) and hood that you will usa. -
Page 9: Make Gas Connection
Make Gas Connection Reverse Door Swing (Optional) Remove the red cap from the gee pipe. Move the dryer close You can change your door swing from a right-aide opening to a to its final position. left-side opening, if desired. Using a wrench to tighten, connect the gee supply to the Reversible Large Side-Swing Door... -
Page 10: Complete Installation
Reversible Super Wide Side-Swing Door Insert screws in bottom holes on left side of cabinet. Tighten screws halfway. Position door so large end of door hinge slot is over screws. Slide door up so screws are in bottom of slots. _ghtan screws. - Page 11 Notes...
- Page 12 8535915 Benton Harbor, Michigan 49022 3/03 © 2003. All rights reserved. TM DURASAFE is a trademark of Whirlpool, U.S.A. Printed in U.S.A.
Need help?
Do you have a question about the IM70000 and is the answer not in the manual?
Questions and answers