Switching The Dishwasher Off - Haier DW15-PFE1 Instructions For Use Manual

Switching the dishwasher ON
For DW15-PFE1**
Turn on the tap.
Set ON-OFF button " A " to ON. All the programme
indicators "K1,K2,K3,K5,K6 " light .
Press programme button "J1" , programme indicator
" K1" blinks.
If the door is closed, after 5 seconds, the programme
indicator " K1" bcomes to light and the dishwasher
beeps one time , then the programme starts
automatically.
For DW15-PFE2**
Turn on the tap.
Set ON-OFF button " A " to ON. All the programme
indicators "K1,K2,K3,K4,K5,K6 " light .
Press programme button "J1" , programme indicator
" K1" blinks and the time-remaining indicator " F "
displays the time of the programme..
If the door is closed, after 5 seconds, the programme
indicator " K1" bcomes to light and the dishwasher
beeps one time , then the programme starts
automatically.
End of programme
Six beeps will indicate that the wash cycle has finished and all the programme indicators light.

Switching the dishwasher OFF

Several minutes after the programme has ended:
Set main switch "A" to OFF.
Open the door .
Turn the water tap off. (Does not apply when Aquastop unit has been fitted)
Remove dishes, etc. when they have cooled down.
A
K1 K2 K3 K5
J1
A
K5 K6
K1 K2 K3 K4
J1
K6
F
19