Kenmore 721.80002 Installation Instructions Manual page 18

STEP 6 :ATTACHTHEOVEN TO THEWALL
5. Roof vented installation: See Figure 32.
Install ductwork through the vent opening in the
upper cabinet. Complete the venting system through
the roof according to the method needed.
See _°PREPARE THE VENTING SYSTEM," STEP 2 on
the page 8. Use caulking to seal exterior roof
opening around the exhaust cap. See Figure 6 on
page 8.
6. Use power supply cord damp to bundle the power
supply cord. Install the power supply cord damp,
using a screw as shown in Figure 33, to inside of
the cabinet.
Figure 32
7. To install the grease filter: Slide it into the sJide sJot,
then push up and toward oven center to lock.
See Figure 34.
8. Plug in the power supply cord.
9. Read your Owner's Manual, then check the
operation of your microwave oven.
i I IM /_l P°wer
clamp
Figure 33
Figure 34
18