Personal Information Stored In Memory - Epson Stylus Office BX300F Series Fax Manual

Telephone Equipment Safety
Instructions
When using telephone equipment, you
should always follow basic safety
precautions to reduce the risk of fire,
electric shock, and personal injury,
including the following:
❏ Do not use the product near water.
❏ Avoid using a telephone during an
electrical storm. There may be a remote
risk of electric shock from lightning.
❏ Do not use a telephone to report a gas
leak in the vicinity of the leak.
❏ Keep this instruction manual handy for
future reference.
For European users:
We, Seiko Epson Corporation, hereby
declare that this equipment, model C362A
is in compliance with the essential
requirements and other relevant
provisions of Directive 1999/5/EC.
For use only in; UK, Ireland, Germany,
France, Spain, Portugal, Italy, Austria,
Switzerland, Belgium, Holland,
Luxembourg, Denmark, Finland, Norway,
Sweden, Poland, Hungary, Czech,
Slovakia, Latvia, Lithuania, Estonia,
Slovenia, Greece, Romania, Bulgaria.
For New Zealand users:
General warning
The grant of a Telepermit for any item of
terminal equipment indicates only that
Telecom has accepted that the item
complies with the minimum conditions
for connection to its network. It indicates
no endorsement of the product by
Telecom, nor does it provide any sort of
warranty. Above all, it provides no
assurance that any item will work
correctly in all respects with another item
of Telepermitted equipment of a different
make or model, nor does it imply that any
product is compatible with all of
Telecom's network services.
Personal Information
Stored in Memory
This printer allows you to store names and
16
Appendix
telephone numbers in its memory which
are saved even when the power is turned
off.
We recommend that you use the following
procedure to erase the memory if you give
the printer to someone else or when you
dispose of the printer.
Erasing the memory
1. Press Mode [Copy/Fax] to select Fax
mode, and then press x Menu.
2. Press u or d to select 6.Restore Default
Settings, and then press OK.
3. Press u or d to select 4.Reset All
Settings, and then press OK.
4. Press the 1 key (for Yes) to restore all
settings.
All data stored in the memory is erased.