Download Print this page

Safety Precautions - Haier HWS60-40 User Manual

Haier spin dryer user's manual

Advertisement

Safety precautions

Please insert the power cord into special
receptacle with rated voltage.Be sure to
use single-phase three pins receptacle.If
possible,please adopt electric leakage
protector.
Do not bend, stretch, twist, bind the power cord by force,
or reform it. Do not press or clamp it with heavy items.
Keep the prong of the power plug clean.
If dust is found on the power plug, please wipe it off with dry cloth.
If the power cord and power plug are bad, or the receptacle is loose,
be sure to have it replaced by the technicians of our special shop
or our agent, or the after-sale service department for the sake
of avoiding any risk.
In case the spin dryer is installed
on ground with carpet , do not block
the ventilation hole with carpet.
Do not put the machine at damp place
like the bathroom . Never wash it with
water. Do not place wet laundries on the
control panel.
When the machine is normally using,
please put the power plug at the loc-
ation easily to be inserted and extracted
by hand. Be sure to pull the plug off when
there's power failure, or the machine is
being moved, cleaned or when it is idle.
Do not share one receptacle with other
electric appliances. Do not use it in
case that the power plug is damaged
or the inserting into the receptacle is
loose.
Ventilation hole at
the bottom of the
spin dryer
Do not wash water-proof laundries
such as the raincoat, bicycle shelter
etc. To avoid abnormal vibration
during spinning.

Advertisement

loading

This manual is also suitable for:

Hws60-50