Subscribe to Our Youtube Channel
Related Manuals for AUSTRALIAN MONITOR XDS8
Summary of Contents for AUSTRALIAN MONITOR XDS8
- Page 1 INSTALLATION AND OPERATION MANUAL XDS SERIES FULL RANGE PASSIVE LOUDSPEAKERS XDS8 XDS10 XDS12 SUBWOOFERS XDS115 XDS212...
-
Page 2: Important Safety Information
IMPORTANT SAFETY INFORMATION PRÉCAUTIONS DURANT UTILISATION Read these instructions. LISEZ ces instructions. Keep these instructions. Tenez ces instructions. Heed all warnings. Notez tous les avertissements. Follow all instructions. Suivez toutes les avertissements. Do not use this apparatus near water. N’utilisez pas ce produit près de l’eau (la piscine, la plage, le lac, etc.). Clean only with dry cloth. -
Page 3: Table Of Contents
INTRODUCTION AND CONTENTS INTRODUCTION XDS SERIES FRONT PANEL The XDS range of speakers includes 8”, 10” and 12” models all with high quality compression drivers and two subwoofer models REAR PANEL with a single 15” or dual 12”. The XDS range of speakers is perfect for driveway or corporate hire MOUNTING as well as live sound installations. -
Page 4: Front Panel
Two passive subwoofers are available in the XDS range, a ported/front loaded High Frequency Driver single 15” subwoofer and a dual 12” bandpass subwoofer. A single horn loaded compression driver. XDS8 1 x 1.35”. Flare: 100º x 100º non-rotatable XDS10 1 x 1.35”. Flare: 50-100º x 50º rotatable... -
Page 5: Rear Panel
REAR PANEL XDS212 shown here XDS10 shown here XDS212 Dual 12” Subwoofer Frequency Response (-3dB) 50Hz–180Hz Sensitivity (dB 1W 1M) 99 dB Impedance 8 Ohm Recommended Max Power (Program) 600W Made in China XDS10 2 Way Full Range Speaker Made in China Speaker Input Speaker Input Speaker inputs are via a pair of 4pole twist lock connectors (Neutrik speakON or... -
Page 6: Mounting
The XDSWMB wall mount bracket permits vertical installation with a wide range of angular adjustment in the horizontal and vertical axis. ATC310 pole mount U brackets 330 mm (13.0”) 140 mm (5.5”) XDS8 400 mm (15.8”) 190 mm (7.5”) XDS10 515 mm (20.3”) 205 mm (8.1”) - Page 7 M10 eye bolts. Walls and mounting surfaces must be capable of supporting the speaker and When suspending an XDS8, XDS10 or XDS12 loudspeaker, the two mounting bracketry in a safe and secure manner. points towards the front of the cabinet should be used, with the 3rd point used to angle the enclosure as needed.
-
Page 8: Accessories
ACCESSORIES XDS8 PART DESCRIPTION XDS8UB U bracket for XDS8 XDSWMB Wall mounting bracket for XDS8/10/12 AMISLSB1 Wall mount bracket ATC303 Tripod speaker stand ATC304 Heavy duty tripod speaker stand ATC305 Winch up speaker stand XDS10 PART DESCRIPTION XDS10UB U bracket for XDS10... -
Page 9: Dimensions
DIMENSIONS 293.00 mm (11.5”) XDS8 XDS8 2 Way Full Range Speaker Made in China 348.60 mm (13.7”) XDS10 XDS10 2 Way Full Range Speaker Made in China 396.00 mm (15.6”) XDS12 XDS12 2 Way Full Range Speaker Made in China... - Page 10 DIMENSIONS XDS115 600.00 mm (23.6”) 512.00 mm (20.1”) XDS115 Single 15” Subwoofer Frequency Response (-3dB) 35Hz–500Hz Sensitivity (dB 1W 1M) 96 dB Impedance 8 Ohm Recommended Max Power (Program) 300W Made in China XDS212 512.00 mm (20.1”) 600.00 mm (23.6”) XDS212 Dual 12”...
-
Page 11: Specifications
SPECIFICATIONS XDS8 XDS10 XDS12 Impedance (Nominal) 8 Ohms 8 Ohms 8 Ohms Power (Continuous) 100 Watts 250 Watts 300 Watts Sensitivty (1 W / 1 M) 92 dB 94 dB 96 dB Calculated Max SPL 112 dB 118 dB 121 dB Dispersion (-6 dB Points) (H x V) 100º... - Page 12 ENGINEERED BY AUSTRALIAN MONITOR Address: 1 Clyde Street, Silverwater, Sydney NSW 2128 Australia. Private Bag 149, Silverwater NSW 1811 ACN 007 573 417 Website: www.australianmonitor.com.au International enquiries email: international@australianmonitor.com.au DISTRIBUTED IN AUSTRALIA AND NEW ZEALAND BY HILLS SVL www.hillssvl.com.au P: 02 9647 1411...
Need help?
Do you have a question about the XDS8 and is the answer not in the manual?
Questions and answers