Kenmore 41798022000 Installation Instructions Manual page 19

Reversing Door Swing
Reaffaching the door
1. Holding the door in both hands, squarely insert the '%"
post on the back of the hinge into the "T" slot on the
front panel and lower it to align the mounting holes.
.
Close the door and test operation of hinge, strike and
latch.
"T" POST ON
DOOR HINGE
"T" SLOT IN
FRONT PANEL
2. While supporting the door, install the upper pan head
screw first and then the lower one.
Correctly installed hinge screws will press hinge flush to
front panel. Any gap between hinge and front panel will
19