Haier GDZ22-2 User Manual page 9

Various button initial status for "Normal program"
Softer
Cycle Signal
Off
Wrinkle Care
Normal
Cycles
Indicate current program remaining time
Nixie display
High
Temp
Dryness Level More Dry
Auto-program
Timed/Cycles
2. Press "Cycles" button to select a suitable full automatic cycle
The Normal program will be automatically selected after powering on. If other
full automatic program is desired, press "Auto-program Selection" button
until corresponding indicator turns on.
Customer
Normal
Heavy Duty
Cotton
Initial status of various buttons when setting "Auto-program Selection".
Cycles Normal Heavy Duty
Wrinkle Care To be used together with reserve function, off if reserve is disabled
Cycle Signal
Delay Start Indicate current selected program remaining time
Timed/ Cycles
Temp
High
Dryness Level
Notes: If "Customer" is selected, various buttons will indicate previous conditions
set by the user.
"Customer" function is a program designed to facilitate user's operation. It can
memorize programs defined by user himself and display the previous program
upon next application of this function.
Use details are as follows:
After powering on, press "Cycles" until "Customer" status, then set "Cycles" to
Timed Dry or Rack Dry, and set status of other buttons. Press "Start/Pause" button
or after half a minute, the program defined by user himself will be stored and
will be directly displayed upon next use.
Notes: Pressing "Dryness Level" button will be inactive during use of "Customer"
function.
Bulky Items
Casual
Cycles
Delicate
Cotton
Softer
Auto Dry
High High
More Dry
Delicate Casual Bulky Items
Low Middle Middle
8