Cf Card Adapter Installation - Century Falcon 4D Plus Series User Manual

3-3. CF Card Adapter Installation

CF Card Adapter
1
(Front)
CF Card Adapter
2
(Back)
【 】
Note
Please power off the printer
before installing the CF Card
Adapter.
1. Open the top cover by
pressing the Cover
Open Buttons on both
sides.
2. Take off the label roll
core.
3. Open and remove the
plastic cover from the
inner base.
4. Check the
correspondent pins and
sockets to plug the
adapter card onto the
main board.
【 】
Note
Please make sure the sockets
and the pins are match,
otherwise the pins may get
damaged.
5. Close the plastic cover.
Falcon 4D Plus User's Manual
1
22
2