Setting Up The Monitor; Unpacking The Monitor; Assembling The Monitor - HP 2311gt User Manual

3

Setting Up the Monitor

Unpacking the Monitor

1. Unpack the monitor and store the packing box.
2. Turn off the computer and other attached devices.
3. Prepare a flat area to assemble the monitor. You may need a flat, soft, protected area for placing
the monitor screen-down while preparing it for installation.

Assembling the Monitor

Place the monitor in a convenient, well-ventilated location near your computer. Connect the monitor
cables after you have assembled the monitor.
CAUTION:
can cause damage.
TIP: For monitor displays with glossy bezels, consider the placement of the display, because the
bezel might cause interfering reflections from surrounding light and bright surfaces.
1. Set the monitor panel down on a flat, soft, protected table or desk surface.
2. Slide the pedestal into the slot on the base until the pedestal clicks into the base.
NOTE:
Figure 3-1
6 Chapter 3 Setting Up the Monitor
The screen is fragile. Avoid touching or applying pressure to the LCD screen; doing so
The bottom side of the monitor base might look different on your model.
Assembling the Base and Pedestal
ENWW