Connecting The Vga (Analog) Or Dvi-D (Digital) Cable; To Connect The Vga Cable; To Connect The Dvi-D Cable; Connecting The Hdmi Cable - HP w1707 User Manual

Connecting the VGA (Analog) or DVI-D (Digital) Cable

Use a VGA video cable or a DVI-D video cable (provided with select models). To use DVI, you must have a
DVI-compliant graphic card. Connectors are located on the back of the monitor. Be sure the computer and monitor
are turned off and unplugged.
Some graphic cards have both a DVI connector and a DVI-to-VGA converter included in the box (select models only).
If the monitor has a VGA connector but no DVI connector, use the DVI-to-VGA converter to connect to the computer:
Connect the DVI-to-VGA converter to the DVI connector on the computer graphic card, and then connect the VGA
cable to the converter and the monitor.
Connecting the VGA or DVI-D cable—connector locations may vary

To connect the VGA cable

Connect one end of the VGA video cable to the back of the monitor and the other end to the VGA video connector
on the computer.

To connect the DVI-D cable

Connect one end of the DVI-D video cable to the back of the monitor and the other end to the DVI video connector on
the computer. You can use this cable only if your compute has a DVI-compliant graphic card installed. The monitor
DVI-D connector and cable are included with select models only.
✎
NOTE: If you use a DVI-to-HDMI adapter, you must connect the green audio cable to enable the speakers. The signal
from the DVI connector is for video only.

Connecting the HDMI Cable

Connect one end of the HDMI cable (select models only) to the back of the monitor and the other end to any
compatible digital audio/video source, such as a set-top box, a DVD player, or a digital television.
User's Guide
Setting Up the Monitor
3–7