Step 1: Connecting This Unit - Yamaha PJP-100UH Owner's Manual

PREPARATION PROCEDURE

Step 1: Connecting this unit

Follow the procedure below to connect this unit to a PC, and then connect the AC adapter.
1
Connect the USB port of this unit to that of
the PC using a USB cable.
In addition to the PC connection through a USB cable, this
unit can be connected to a PC or TV conference system
through audio connection cables. For details, see
"Connecting audio connection cables" (page 12).
2
Connect the AC adapter to the DC IN 12V
terminal.
3
Connect the power cable to the AC adapter.
4
Connect the power cable to the AC outlet.
This unit is turned on and the microphone indicators
light up in sequence.
Pressing and holding MIC MUTE for 3 seconds sets this unit to
the standby mode. When this unit is in the standby mode, it can
be turned on again by pressing any key.
8
To USB port
To an AC wall outlet