Controls And Functions - Yamaha PJP-100UH Owner's Manual

CONTROLS AND FUNCTIONS

Top panel
Microphone indicators
A blue LED lights to indicate the audio pick up area.
Display
The LCD shows the current status of this unit (page 6).
(Cancel)
Press the key to cancel a setting without saving it or to
return to the previous page.
/ (Up/Down)
Press either key to select a setting item or move the cursor
up or down.
(Enter)
Press the key to enter a setting.
Area select keys
Press one of the keys to select an audio pickup area in the
microphone mode setting (page 16).
4
CONTROLS AND FUNCTIONS
ALL MIC/SP
MIC/SP AREA SELECT
MIC MUTE VOL
MIC MUTE
Press the key to temporarily defeat (mute) the
microphones of this unit. The LED to the left of the key
lights in red during muting.
Pressing the key again during muting cancels it and turns
the LED off.
Pressing and holding MIC MUTE for 3 seconds sets this unit to
the standby mode. When this unit is in the standby mode, it can
be turned on again by pressing any key.
VOL +/–
Press either key to adjust the speaker volume. Holding
either key increases or decreases the volume continuously.