Table of Contents
Advertisement
DVG-2016S/2032S User's Manual
Early Media Treatment: If this variable is disabled, the system will send RTP immediately after a
connection with a proxy is set up. The default setting is enabled. If communicating with other gateways
encounters problems, please disable this function.
Loop Current Drop Trigger Time: It is to set the trigger time for dropping loop current by FXS port. A
setting of zero is to disable this function. It is used to avoid the line engaged if FXS port is connected to
PBX.
Loop Current Drop Duration: It is to set the drop duration.
Enable ROH: The system will play Receiver Off-Hook tone to notify user of hanging up the phone set.
FXS Ring Voltage: FXS ringing voltage, the unit is VRMS.
Max. Eternal Call: Defines the maximum concurrent Internet call is allowed by the gateway.
VoIP Centrex Extension Digit Count: This feature is to enable and set the digit count of VoIP
Centrex. The setting "0" zero is to disable this function.
VoIP Centrex Digit: Enter the digit for VoIP call. If you dial VoIP Centrex Digit first, the dialing plan is
according to the Digit Map; otherwise the VoIP gateway will send the number which digit count is the
same as VoIP Centrex Extension Digit Count.
Hunting/Ring: This variable is able to set FXS group hunting using simultaneous ring or sequential
ring.
Sequential Ring Time: Sets the ring time of each port, when sequential ring is chosen.
Hunting Priority: This variable can be adjusted using the Up and Down arrows.
D-Link Systems, Inc.
Telephony Settings
20
Advertisement
Table of Contents
