Tools You Will Need; Mounting Space - Kenmore 401.8504 Series Installation Instructions Manual

TOOLS YOU WILL NEED
#1 and #2 Phillips
screwdriver
Tin snips (for cutting
damper, if required)
Safety goggles
Pencil
Scissors (to cut template, if
necessary)
<
Saw (saber, hole or keyhole)
Ruler or tape measure and
straight edge
Electric drill with 3/16", I/2"
and 5/8" drill bits
Stud finder or Hammer
(optional)
Carpenter square (optional)
Gloves
Level
Duct and masking tape Filler blocks or scrap wood pieces, if needed for top cabinet spacing
(used on recessed bottom cabinet installations only)
MOUNTING SPACE
* The space between the cabinets must be 30"
wide and free of obstructions.
* This microwave oven is for installation over
ranges up to 30" wide.
* If you are going to vent your microwave oven to
the outside, see Hood Exhaust Section for exhaust
duct preparation.
* When installing the microwave oven beneath
smooth fiat cabinets be careful to follow the
instructions on the top cabinet template for
power cord clearance.
5 _
Bottom Surface Of
cabinet needs to be
3011°[ more from
the cooking surface.
/
7