Default Settings - Communication Parameters - Metrologic MS9535 VoyagerBTSeries Installation And User Manual

D S
EFAULT ETTINGS
Many functions of the scanner and cradle can be "configured" – that is, enabled
or disabled. The scanner and cradle are shipped from the factory configured to a
set of default conditions. The default parameter has an asterisk (*) in the charts
on the following pages. If an asterisk is not in the default column then the default
setting is OFF or DISABLED. Every communication does not support every
parameter. If the communication supports a parameter listed in the charts on the
following pages, a check mark will appear.
Parameter
Normal Scan Mode
Continuous Scan Mode
Blinky Scan
Continuous Blinky Scan
Custom (one shot) Scan
Long-Range In-Stand
Short-Range In-Stand
Long-Range Out-of-Stand
Short-Range Out-of-Stand
CodeGate Active In-Stand
CodeGate Inactive In-Stand
CodeGate Active Out-of Stand
CodeGate Inactive Out-of Stand
UPC/EAN
Code 128
Code 93
Codabar
Interleaved 2 of 5 (ITF)
MOD 10 check on ITF
Code 11
Code 39
Full ASCII Code 39
- C
OMMUNICATION
Default
*
*
*
*
*
*
*
*
*
*
*
P
ARAMETERS
Light
RS232
Pen
IBM
KBW USB
46XX
35