Default Settings - Metrologic MS9524 VoyagerPDF Series Installation And User Manual

D S
EFAULT ETTINGS
Many functions of the scanner can be "programmed" – that is, enabled or
disabled. The scanner is shipped from the factory programmed to a set of
default conditions. The default parameter of the scanner has an asterisk (*) in
the charts on the following pages. If an asterisk is not in the default column then
the default setting is OFF or DISABLED. Every communication does not support
every parameter. If the communication supports a parameter listed in the charts
on the following pages, a check mark will appear.
PARAMETER
Normal Scan Mode
Continuous Scan Mode
Blinky Scan
Continuous Blinky Scan
Custom (one shot) Scan
Long-Range In-Stand
Short-Range In-Stand
Long-Range Out-of-Stand
Short-Range Out-of-Stand
CodeGate Active In-Stand
CodeGate Inactive In-Stand
CodeGate Active
Out-of Stand
CodeGate Inactive
Out-of Stand
UPC/EAN
Code 128
Code 93
Codabar
Interleaved 2 of 5 (ITF)
MOD 10 check on ITF
Code 11
Code 39
Full ASCII Code 39
PDF
PDF CodeGate Active
Out-of-Stand
DEFAULT OCIA RS-232
*
*
*
*
*
*
*
*
*
*
*
*
LIGHT IBM
KBW USB
PEN 46XX
LASER
EMULATION
37