Failure Modes - Metrologic MS9535 VoyagerBTSeries Installation And User Manual

S O
CANNER PERATION
Indicators

Failure Modes

Flashing Blue and one Razzberry Tone
This indicates the scanner has experienced a laser sub-system
failure. Return the unit for repair to an authorized service center.
Flashing Blue and White with Two Razzberry Tones
This indicates the scanner has experienced a scanning mechanism
failure. Return the unit for repair to an authorized service center.
Continuous Razzberry Tone with all LEDs off
If the scanner emits a continuous razzberry tone upon power-up, the
scanner has experienced an electronic failure. Return the unit for
repair to an authorized service center.
Three Beeps – on power up
If the scanner beeps 3 times on power-up then the non-volatile
memory (NovRAM) that holds the scanner configuration has failed. If
the scanner does not respond after reconfiguring, return the scanner
for repair to an authorized service center.
Two Razzberry Tones with Steady White
When the scanner scans a bar code without establishing Bluetooth
communication first, the scanner will emit two razzberry tones and the
white LED will stay steadily lit.
The scanner reads a bar code but the cradle fails to transmit the data
Long Beeps with Steady Amber LED
The scanner will emit a long beep every 5 second indicating the
scanner's contacts are not making a physical connection with the
charging contacts on the cradle.
Proper placement of the scanner in the cradle is essential for the
charging process. .
25