Default Settings - Metrologic MS9524 Installation And User Manual

D S
EFAULT ETTINGS
Many functions of the scanner can be configured or enabled/disabled.
The scanner is shipped from the factory configured to a set of default conditions.
All default parameters of the scanner have an asterisk (
column. If an asterisk is not in the default column then the default setting is off or
disabled. Every interface does not support every parameter. A check mark ( )
will appear in the interface column if it supports the parameter listed.
PARAMETER
Normal Scan Mode
Continuous Scan Mode
Blinky Scan
Continuous Blinky Scan
Custom (one shot) Scan
Long-Range In-Stand
Short-Range In-Stand
Long-Range Out-of-Stand
Short-Range Out-of-Stand
CodeGate Active In-Stand
CodeGate Inactive In-Stand
CodeGate Active Out-of-Stand
CodeGate Inactive
Out-of-Stand
UPC/EAN
Code 128
Code 93
Codabar
Interleaved 2 of 5 (ITF)
MOD 10 check on ITF
Code 11
Code 39
Full ASCII Code 39
PDF
PDF CodeGate Active
Out-of-Stand
DEFAULT OCIA RS232
*
*
*
*
*
*
*
*
*
*
*
*
) marked in the default
*
LIGHT IBM
KBW USB
PEN 46XX
LASER
EMULATION
35