Table of Contents
Advertisement
Installation & Connections
Installing Lens
The following describes how to attach your lens to the camera.
1. Remove the body cap at the front of the camera.
2. Screw the lens into the camera body. While you're gently turning the lens
clockwise, you will hear a 'click' . Then twist the lens by another one-third inch to
firmly secure the lens. If you are installing a DC auto iris lens, connect the lens'
control cable to the DC iris connector located at the back of the camera.
Connecting Video and Power
1. Use a BNC video cable to connect the terminal BNC connector from the camera
to a mating BNC connector.
2. Attach the Power adapter (optional accessory) to the terminal power connector
on the camera. The recommended adapter specifications is DC 12V/500mA or AC
24V/500mA. Then connect the power plug to a power outlet.
Monitor
Power Adapter
Analog Camera
Installation & Connections
5
Advertisement
Table of Contents
