White Balance - COMPRO CP180 User Manual

previously selected 'MANUAL' for the 'LENS' item, the mode will be forced as 'SHUT' .
The 'BRIGHTNESS' item let you adjust the aperture to tailor the brightness to your
preference.
Under 'LOW LUMINANCE' , you can choose 'AGC' mode (default setting) to have the
camera automatically increase the gain when in low light conditions to produce a
brighter image. The 'BRIGHTNESS' item allows you to tailor brightness level to your
needs.
Manual Shutter / AGC
Opt for manual shutter / AGC option when you have selected 'MANUAL' for the 'LENS'
item, which then provides a submenu that contains mode, shutter and AGC setting.
'SHUTTER' item lets you specify the shutter time (between 1/50 sec and 1/10000 sec).
Adjust 'AGC' level according to your lighting conditions.

White Balance

You can fine-tune the color of the image here. 'ATW' (Auto White Balance) is the default
setting. Besides 'ATW' , there are also 'PUSH' , 'USER1' , 'USER2' , 'ANTI CR' , 'MANUAL' , and
'PUSH LOCK' .
ATW (Auto White Balance)
ATW allows the camera to adjust white balance in accordance with the color
temperature of the light source. 'ATW' contains a submenu (shown below). 'SPEED'
controls the speed of ATW. Changing the 'ATW FRAME' and 'ENVIRONMENT' setting
will affect the color temperature range. Smaller value for 'ATW FRAME' leads to a
smaller range of color temperature. The color temperature ranges from 2500K to
9500K for indoor environment, and 1800K to 10500K for outdoor environment.
Selecting 'USER1/2' mode will allow you to adjust the blue gain and red gain individually.
'MANUAL' mode will let you adjust the blue gain and red gain simultaneously. The 'ANTI
CR' (anti color rolling suppression) mode uses a smaller range of color temperature than
ATW mode does.
ATW
SPEED
DELAY CNT
ATW FRAME x1.00
ENVIRONMENT INDOOR
RETURN
026
026
Operating the Camera 11