Motion Detection - COMPRO CP180 User Manual

Motion Detection

You can configure the motion detection function here. Switch to 'ON' and then press
the setting button to enter its submenu. You can create up to 4 motion detection areas
by enabling 'MONITOR AREA' and adjusting the 'TOP/BOTTOM/LEFT/RIGHT' slider
separately. You can also adjust the detection sensitivity. 'BLOCK DISP' , when switched on,
will highlight moving objects in the scene with color blocks; when switched to 'ENABLE
' , it allows you to enter a grid screen in which you will use the operation buttons to
move the translucent square and, by pressing the setting button, specify areas in the
scene that will not be detected (which then will become transparent). To exit the grid
screen, press and hold the setting button for 2 seconds before releasing it.
Privacy
Privacy function can create up to 4 masks to protect sensitive areas in the scene. Switch
to 'ON' to enter its submenu as shown below. Select an area and adjust the 'TOP/
BOTTOM/LEFT/RIGHT' slider separately to create a mask on screen. You can also specify
the color, transparency (1 being opaque) and mosaic setting (not effective on opaque
masks).
MOTION DET
DETECT SENSE
BLOCK DISP OFF
MONITOR AREA ON
AREA SEL 1/4
TOP
BOTTOM
LEFT
RIGHT
RETURN
PRIVACY
AREA SEL 1/4
TOP
BOTTOM
LEFT
RIGHT
COLOR 1
TRANSP 1.00
MOSAIC OFF
RETURN
111
000
000
000
000
000
000
000
000
Operating the Camera 13