Product Overview
Package Contents
Contact your local distributor should you find anything missing from the package.
1
Analog camera (with body cap) x 1
Power terminal block x 1
IR terminal block x 1
User's guide x 1
Hardware Overview
Body cap – Remove the body cap to mount the lens you purchased.
Screw hole – For ceiling mount and bracket.
Screw hole – For ceiling mount and bracket.
DC auto iris lens connector – Connect to the cable from your DC auto iris lens.
Operation buttons – Used to perform OSD settings.
Video output terminal – Connect to a BNC video cable.
IR connector – Connect to a switch to control IR-cut filter externally. Under external
D/N mode, when the positive and negative pole are connected (with a jumper or
otherwise), the IR-cut filter will be used; when they are disconnected, the IR-cut filter
will be removed.
Power input terminal – A 3-pin power connector.
2
3
4
Product Overview
3