Motion Detection - COMPRO CP480 User Manual

ATR (Adaptive Tone Reproduction)
Similar to Wide Dynamic Range, ATR can compensate for gradation of the subjects to the
optimal level and thereby improve contrast in both bright and dark areas in the picture.
Switch on ATR and then press the setting button to enter its submenu. Use the joystick
to select 'LUMINANCE' or 'CONTRAST' and then adjust the level to your preference.

Motion Detection

You can configure the motion detection function here. Switch to 'ON' and then press
the setting button to enter its submenu. You can create up to 4 motion detection areas
by enabling 'MONITOR AREA' and adjusting the 'TOP/BOTTOM/LEFT/RIGHT' slider
separately. You can also adjust the detection sensitivity. 'BLOCK DISP' , when switched on,
will highlight moving objects in the scene with color blocks; when switched to 'ENABLE
' , it allows you to enter a grid screen in which you will use the joystick to move the
translucent square and, by pressing the setting button, specify areas in the scene that
will not be detected (which then will become transparent). To exit the grid screen, press
and hold the setting button for 2 seconds before releasing it.
ATR
LUMINANCE MID
CONTRAST MID
RETURN
MOTION DET
DETECT SENSE
BLOCK DISP OFF
MONITOR AREA ON
AREA SEL 1/4
TOP
BOTTOM
LEFT
RIGHT
RETURN
111
000
000
000
000
Operating the Camera 13