Page 1
Mon.–Fri., 6 a.m.–6 p.m. MST ON THE WEB: www.wesloservice.com CAUTION Visit our website at Read all precautions and instruc- tions in this manual before using www.weslo.com this equipment. Save this manual new products, prizes, for future reference. fitness tips, and much more!
10. To purchase a surge suppressor, see You must be able to safely lift 45 pounds (20 your local WESLO dealer or call the toll-free kg) to raise, lower, or move the treadmill. telephone number on the front cover of this...
Page 4
21. When folding or moving the treadmill, make cord immediately after use, before cleaning sure that the storage latch is fully closed. the treadmill, and before performing the main- tenance and adjustment procedures de- 22. Do not change the incline of the treadmill by scribed in this manual.
® CADENCE 60 number and serial number before contacting us. The CT treadmill. The CADENCE 60 CT treadmill com- model number of the treadmill is WLTL22306.0. The bines advanced technology with innovative design to serial number can be found on a decal attached to the...
ASSEMBLY To hire an authorized service technician to assemble the treadmill, call toll-free 1-800-445-2480. Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials; do not dispose of the packing materials until assembly is completed. Do not remove the long wire inside the Right Handrail until instructed.
Page 7
2. Have a second person hold the Base (71) in the position shown. Identify the Right Handrail (6) which has a large hole near the lower end. Hold the Right Handrail (6) so that the bend is in the Large position shown.
Page 8
5. Hold the Console (1) near the Right Handrail (6). Touch Connector the Right Handrail to discharge any static. Untie the wire from the end of the Wire Harness (22). Insert the end of the Wire Harness through the three looped plastic ties.
Page 9
8. Carefully lower the Handrails (6, 7) to the floor. Center the Frame (55) between the Handrails, and tighten the four Handrail Bolts (12). Then, raise the Handrails to the verti- cal position. See drawing 8a. Attach the Latch Assembly (41) to the Left Handrail (7) with two 16mm Screws (58).
Grounded Outlet Box drawing 1 at the right). To purchase a surge sup- Adapter pressor, see your local WESLO dealer or call the Surge Suppressor toll-free telephone number on the front cover of this manual and order part number 146148, or see your local electronics store.
Page 11
CONSOLE DIAGRAM Note: If there are sheets of clear plastic Clip on the console, remove the plastic. FEATURES OF THE CONSOLE HOW TO TURN ON THE POWER The treadmill console offers a selection of features Plug in the power cord (see designed to make your workouts more effective.
Page 12
The lower right HOW TO USE THE MANUAL MODE display—The lower right display can show the speed of the walking belt Insert the key into the console. and the approximate number of calories that See HOW TO TURN ON THE POWER on page you have burned.
Page 13
To stop the program, press the Stop button. The HOW TO USE A CROSSTRAINER PROGRAM time will begin to flash in one of the displays. To restart the program, press the Start button or the Digital Speed increase button. The walking belt Insert the key into the console.
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) to raise, lower, or move the treadmill. 1. Hold the metal frame firmly in the location shown by the arrow at the right.
Page 15
HOW TO LOWER THE TREADMILL FOR USE 1. Hold the treadmill with your right hand as shown. Pull the latch knob to the left and hold it. Pivot the frame down until it is past the latch pin. Latch Knob Catch 2.
MAINTENANCE AND TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please see the front cover of this manual. PROBLEM: The power does not turn on SOLUTION: a.
Page 17
PROBLEM: The walking belt slows when walked on SOLUTION: a. Use only a single-outlet surge suppressor that meets all of the specifications described on page 10. b. If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may be- 2"–3"...
CONDITIONING GUIDELINES is activity that requires large amounts of oxygen for prolonged periods of time. This increases the demand WARNING: Before beginning on the heart to pump blood to the muscles, and on the this or any exercise program, consult your lungs to oxygenate the blood.
Page 19
SUGGESTED STRETCHES The correct form for several basic stretches is shown at the right. Move slowly as you stretch—never bounce. 1. Toe Touch Stretch Stand with your knees bent slightly and slowly bend forward from your hips. Allow your back and shoulders to relax as you reach down toward your toes as far as possible.
• the MODEL NUMBER of the product (WLTL22306.0) • the NAME of the product (WESLO CADENCE 60 CT treadmill) • the SERIAL NUMBER of the product (see the front cover of this manual) • the KEY NUMBER and DESCRIPTION of the desired part(s) (see the PART LIST and the EXPLODED...
Need help?
Do you have a question about the Cadence 60 CT and is the answer not in the manual?
Questions and answers