Table of Contents
Advertisement
Quick Links
CONGRATULATIONS!
steamer available. CROWN VERITY Inc. Pro steamers are designed to last a
lifetime...or more! With proper care and maintenance, your steamer will provide
unparalleled performance and many years of outdoor cooking pleasure.
Please read this manual carefully to ensure safe operation and to maximize your
cooking enjoyment. It is your responsibility to see that your steamer is properly
assembled, installed, and cared for. Failure to follow instructions in this manual could
result in serious bodily harm and/or property damage.
WARNING: Improper installation, adjustment, alteration, service or
maintenance can cause property damage, injury or death. Read the
installation, operating and maintenance instructions thoroughly before
installing or servicing this equipment.
CROWN VERITY INC., 37 ADAMS BLVD., BRANTFORD, ON. CAN. N3S 7V8
OWNER'S MANUAL
MODEL: PS-001 PRO STEAMER
REVISED JAN, 2006
*PLEASE RETAIN FOR FUTURE REFERENCE
You are the proud new owner of the finest commercial mobile
TEL: (519) 751-1800
www.crownverity.com
Email: info@crownverity.com
Certified for use in Canada and the
United States of America.
Certified to / a.: CSA 1.8 2004, CSA
1.18 2004
Conforms to / Conforme a: ANSI std
Z21.89 2004 / ANSI std Z83.112004
FAX: (519) 751-1802
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for CROWN VERITY PS-001
Summary of Contents for CROWN VERITY PS-001
- Page 1 CONGRATULATIONS! You are the proud new owner of the finest commercial mobile steamer available. CROWN VERITY Inc. Pro steamers are designed to last a lifetime...or more! With proper care and maintenance, your steamer will provide unparalleled performance and many years of outdoor cooking pleasure.
-
Page 2: Table Of Contents
Parts and Components ........13 CROWN VERITY INC., 37 ADAMS BLVD., BRANTFORD, ON. CAN. N3S 7V8... - Page 3 FOR YOUR SAFETY IF YOU SMELL GAS: 1) Shut off gas supply to appliance. 2) Extinguish any open flame. 3) Open lid or remove storage cover(s). 4) If odour continues, immediately call your Fire Department. DO NOT store or use gasoline or other flammable vapours and liquids in the vicinity of this or any other appliance.
- Page 4 Conforms to / Conforme a: ANSI std Z21.89 2004 / ANSI std Z83.112004 This outdoor cooking gas appliance is not for installation in or on recreational vehicles and/ or boats. CROWN VERITY INC., 37 ADAMS BLVD., BRANTFORD, ON. CAN. N3S 7V8 TEL: (519) 751-1800 FAX: (519) 751-1802 www.crownverity.com...
- Page 5 If ignition does not immediately occur, turn control regulator to closed position, close L.P cylinder valve and wait 5 minutes before attempting to re-light CROWN VERITY INC., 37 ADAMS BLVD., BRANTFORD, ON. CAN. N3S 7V8 TEL: (519) 751-1800 FAX: (519) 751-1802 www.crownverity.com...
-
Page 6: Lighting And Operation Instructions
LIGHTING AND OPERATION INSTRUCTIONS CAUTION! Steam can cause severe burns, use caution when operating the Pro Steamer, Wear protective gloves, never stand directly in front of the Pro Steamer when opening the lid, allow water to cool completely before draining. Read all warnings and instructions before operating the Pro-Steamer. -
Page 7: Tips And Techniques
TIPS AND TECHNIQUES BREAK-IN - Before cooking in your Crown Verity Inc. Pro Steamer for the first time; we suggest a thorough wash-down and boil-off. Fill the Pro Steamer to the fill line, operate the Pro- Steamer on high setting and bring to a boil for 10 minutes, allow the Pro-Steamer to cool, then drain and rinse the tank and basket. -
Page 8: Cleaning And Storage
CLEANING AND STORAGE Crown Verity Inc. Pro Steamers are easily cleaned because of their all stainless steel construction. For routine cleaning: Mix hot water and white vinegar into steamer tank. Let sit for an hour or over night if convenient. Drain; and rinse with hot water. -
Page 9: Cylinders And Regulators
CYLINDERS AND REGULATORS The Pro Steamer’s self-contained propane system is designed for use with a 9.1 kg. (20 lb.) Propane cylinder, equipped with a Type I cylinder valve. This appliance cannot be connected to a standard Type II valve (with internal left-hand threads only). DO NOT CONNECT TO A PROPANE GAS CYLINDER EXCEEDING THIS CAPACITY, OR USE A CYLINDER WITH ANY OTHER TYPE OF VALVE. -
Page 10: Transportation And Storage
• Do not allow the cylinder to be over filled. • Make sure the LP gas dealer checks the cylinder for leaks after filling. CROWN VERITY INC., 37 ADAMS BLVD., BRANTFORD, ON. CAN. N3S 7V8 TEL: (519) 751-1800 FAX: (519) 751-1802 www.crownverity.com... -
Page 11: Hose And Regulators
HOSES AND REGULATORS WARNING! Your Pro Steamer is designed to operate on L.P . (propane) vapor gas at a pressure regulated at 0 to 10 psi. The regulator(s) supplied with the Pro Steamer is/are set to this pressure and must be used. This regulator is equipped with the Type I (Q.C.C.1), quick closing connection system, which incorporates the following features: 1) Will not allow gas to flow until a positive seal has been made. -
Page 12: Leak Testing
To prevent and/or correct this occurrence, periodically check the burner for obstructions by inserting a pipe cleaner or flexible wire through the air inlet of the burner, and twisting it. CROWN VERITY INC., 37 ADAMS BLVD., BRANTFORD, ON. CAN. N3S 7V8 TEL: (519) 751-1800 FAX: (519) 751-1802 www.crownverity.com... -
Page 13: Troubleshooting Guide
TROUBLESHOOTING GUIDE WHAT HAPPENS WHAT TO LOOK FOR Propane tank is empty. Incorrect lighting procedures. Is the cylinder valve turned on? Regulator assembly not fully tightened to cylinder valve? Large plastic nut on cylinder connector may be cracked or has been 1) Burners will not light overheated, may be wobbling and is not making a gas tight seal inside cylinder valve. -
Page 14: Gas Components Reference
GAS COMPONENTS REFERENCE... -
Page 15: Parts And Components
1/4” x 3/8” ELBOW 9052 3/8” FPT x 3/8” FLR 9053 3/8” x 8” BRASS NIPPLE 9054 TO ORDER PARTS PLEASE CONTACT CROWN VERITY INC., 37 ADAMS BLVD., BRANTFORD, ON. CAN. N3S 7V8 TEL: (519) 751-1800 FAX: (519) 751-1802 www.crownverity.com Email: info@crownverity.com...
Need help?
Do you have a question about the PS-001 and is the answer not in the manual?
Questions and answers