6.SETUP FLOW FOR PRINTING FEATURES (Cont.)
Setup Flow
Set up the IPv6
Set up the Printing
Service
5
Install the Printer
Driver on the Win-
dows Print Server
Configuring the Printer
Drivers
Setting up the Print
Server
Install the Printer
Driver on the Client
computers
48
5.SETUP FLOW
Assign the IP address, Prefix, Gateway address.
Reference: USER FUNCTIONS GUIDE
•
Chapter 4 "SETTING ITEMS (ADMIN)"
"3. SETTING NETWORK FUNCTIONS"
"Setting the IPv6 Protocol"
Reference: TopAccess Guide
•
Chapter 7 "TOPACCESS ADMINISTRATOR MODE"
"Setting up from TopAccess"
"Setting up Network Settings"
"Setting up the IPv6"
Enable the Raw TCP or LPD Printing Service using TopAccess.
Reference: TopAccess Guide
•
Chapter 7 "TOPACCESS ADMINISTRATOR MODE"
"Setting up from TopAccess"
"Setting up Print Service Settings"
"Setting up the Raw TCP Print"
"Setting up the LPD Print"
Install the printer driver from the Client Utilities CD-ROM.
Reference: Printing Guide
•
Chapter 2 "INSTALLING CLIENT SOFTWARE FOR WINDOWS"
"Installing the Client Software for Raw TCP/LPR Printing"
Configure the options and department code.
Reference: Printing Guide
•
Chapter 5 "PRINTING FROM WINDOWS"
"Before Using the Printer Driver"
Configure the printer on the Windows print server as shared printer.
Reference: Network Administration Guide
•
Chapter 1 "SETTING UP NETWORK SERVER"
"Setting up Windows Print Server"
Install the printer driver from the queue in the Windows print server by point
and print installation. This installation method is common for Windows print
sharing service. Please refer to the Windows documentation about the installa-
tion from the Windows shared printer.
Description/Reference