Using The Remote Control - Haier CWH08A Use And Care Manual

Haier air conditioner user manual
Hide thumbs Also See for CWH08A:
Table of Contents

Advertisement

Available languages

Available languages

NOTE: Remote control may differ in appearance.
SMART
SUPER
NOTE: One CR2025 battery (included) powers the remote
control. Replace battery after 6 months of use, or when the
remote control starts to lose power.
You must unscrew small screw
to allow you to remove
battery compartment.
Please ensure the correct direction
for polarity of the cell same as the
indicator on the bracket.
Disposal of bettery Old batteries must be removed and
disposed of in accordance with current legislation as they
are harmful to the environment.
Power
Press POWER to turn on the air conditioner.
Mode
Press MODE to choose Cool, Dry, Fan, Power Saver or Heat
(Heat/Cool models only).
12
Using the MagnaStore Remote Control*
* MagnaStore Remote Control
Magnetically Attaches To Side of
AC For Easy Storage.
A
Bracket
A.
SMART System Control
The air conditioner automatically selects Cool or Dry mode,
depending on room temperature and sets the temperature to
79ºF (26ºC).
The temperature set point can be adjusted down to 75ºF
(24ºC) or up to 83ºF (28ºC). Press the up or down arrow
button once to change the temperature 2ºF (1ºC) or twice to
change it 4ºF (2ºC).
If the current room temperature is lower than the temperature
set point, Dry mode is selected. Fan runs on Auto speed only.
If the current room temperature is higher than the
temperature set point, Cool mode is selected. Fan speed may
be selected by the user.
1. Press SMART System control.
2. In Cool mode, press FAN to select High, Med, Low or Auto.
SUPER Control
Used for fast cooling. The air conditioner automatically sets the
fan speed to High and temperature to 64°F (18ºC).
NOTE: SMART System control button does not operate when
SUPER control is selected.
1. Press SUPER control. The air conditioner automatically
sets the fan speed to High and temperature to 64°F (18ºC).
2. To turn SUPER control off, press the Mode, Fan, Power
or the up arrow button.
Fan
Press FAN to choose High, Med, Low or Auto.
NOTE: Auto fan speed cannot be selected in Fan mode.
SMAR T
SUPER

Advertisement

Table of Contents
loading

Table of Contents