Kenwood DNX7380BT Quick Start Quide page 9

Number Name
fi (Reset)
1
ATT
2
∞, 5 (Vol)
3
AUD
4
NAV
5
MENU
6
TEL
7
0 (Eject)
8
Remote
9
Sensor
Disc insert
10
slot
SD card slot
11
* T he display may not switch to the Graphic Equalizer screen in some conditions.
DNX7380BT/DNX7380BTM/DNX5380BT/DNX5380/DNX5380M
• If the unit or the connected unit fails to operate properly, the unit returns
to factory settings when this button is pressed (Instruction Manual
P.94).
• Switches attenuation of the volume on/off.
• Pressing for 1 second turns the screen off.
Adjusts volume.
Holding down a key turns up the volume in series up to 25. For more than
25, pressing the key turns up the volume one by one.
• Displays Graphic Equalizer screen (Instruction Manual P.84).*
• Pressing for 1 second switches camera view display on/off.
• Displays the navigation screen.
• Pressing for 1 second switches AV out sources.
• When the power off, turns the power on.
• Displays the Top Menu screen (Instruction Manual P.16).
• Pressing for 1 second turns the power off.
• When the power off, turns the power on.
• Displays the Hands Free screen (Instruction Manual P.57).
• Pressing for 1 second displays the Screen Control screen.
• When the power off, turns the power on.
• Ejects the disc.
• Pressing for 1 second opens the panel to the location of the disc slot.
When the panel is opened, pressing for 1 second closes the panel and
pressing for 3 seconds ejects the disc forcibly.
• When the panel is closed, pressing for 3 seconds fully opens the panel to
the location of the SD card slot.
• Receives the remote control signal. You can enable or disable this feature
by Remote Sensor (Instruction Manual P.69).
• If [Remote Sensor] is set to off, the remote control of TV reception is
rejected.
A slot to insert a disc media.
An SD card slot for upgrading the map. For how to upgrade the map, refer
to the instruction manual of the navigation system.
9
Motion