How To Make A Phone Call - Kenwood DNX7380BT Quick Start Quide

H
ow To Make A Phone Call
You can use your Bluetooth cell-phone when paired to this unit.
NOTE
• To use Bluetooth function of DNX5380/DNX5380M, the optional accessory (KCA-BT300) is necessary.
1
Register your cell-phone to the unit.
Follow the procedures shown below. For detailed operation, see Registering the Bluetooth
Unit (P.54) in the Instruction Manual.
1) Press the <TEL> button and touch [BT SETUP].
2) Touch [SET] of [Regist New Device] in the
Bluetooth SETUP screen.
3) Touch [PIN Code Set] in the Searched Device
List screen.
4) Enter PIN code and touch [Enter].
5) Select your cell-phone from the displayed list
in the Searched Device List screen.
Registering is completed.
2
Connect your cell-phone to the unit.
1) Touch [SET] of [Paired Device List] in the
Bluetooth SETUP screen.
2) Touch the desired device from the list and
touch [TEL(HFP)].
The selected device is connected to the unit.
NOTE
• Touch [Audio(A2DP)] if you want to connect the device as an audio player. This key appears only for
.
3
Download your phonebook.
1) Operate the cell-phone to send the phonebook data to this unit.
2) Operate the cell-phone to start the hands-free connection.
NOTE
• See the instruction manual of your cell-phone for the operation.
DNX7380BT/DNX7380BTM/DNX5380BT/DNX5380/DNX5380M
21
Continued