Advanced Setting - Velleman DVR4MQAEE User Manual

D. Playback Control Buttons:
Play / Stop / Pause / Fast Rewind / Fast Forward
E. Snapshot:
Press this button to take a snapshot of the current image which will be saved in the designated destination.
F. Close the Player.
NOTE:
• When pausing the playback picture, press "
to go to the next frame.
• In the playback mode of the software AP, press "
VIDEO. If the BACKUP VIDEO has been altered, the video image will turn to light red and the playback will be
paused.

ADVANCED SETTING

Press the "System Config
NETWORK
The network configuration allows the DVR to connect to an
Ethernet network or dial-up.
1. Static IP:
Enter the "server IP", "gateway", "net mask" and "web
port" and press "APPLY" to confirm.
2. PPPoE:
Enter the "username" and "password" provided by your
ISP (Internet Sever) supplier and press "APPLY" to
confirm.
3. DHCP:
This DHCP function needs to be supported by router or
cable modem network with DHCP service. Choose the
DHCP IP type and press "APPLY" to confirm.
NOTE: PPPoE and DHCP network connection type will
require applying DDNS service to get a "Hostname" to
correspond to dynamic IP address. Refer to "10.f.
DDNS" for details.
NOTE: Some routers may need to restart the DVR to
get the IP address.
DVR4MQAEE_v5
" button to enter the system setting page.
" button to go to the previous frame or press "
" button to check the authenticity of the BACKUP
- 28 -
" button
VELLEMAN